- Top
- Preparation
Setting the clock
Set the clock to use the timer setting, etc.
The System displays the clock in 24-hour time format.
Enter into the setting mode.
|
Remote control |
||
|---|---|---|
 |
Select “TIME ADJUST”.
|
Remote control |
||
|---|---|---|
 |
 |
 |
|
(Select) |
(Enter) |
Adjust the “day”, “hour” and “minute”.
Repeat step 2 to set the “day”, “hour” and “minute” in sequence.
The System will automatically exit the setting mode once the setting is complete.
Checking the clock when the power is turned off
Press the [ 
] button to display for 5 seconds.
|
Remote control |
Main unit |
|
|---|---|---|
 |
 |
NOTE
The clock may gain or lose 1 to 2 minutes per month. You may need to readjust the clock periodically.
Set the clock again if the AC power cord is unplugged or the System is turned off due to the power failure.