Important for USB mass storage class devices

It is recommended that you use a USB device with a capacity of 16 GB or smaller.

Connect a USB device with a maximum consumption current of less than 500 mA.

The more files there are in a USB device, the longer it takes for the System to load them.

To play back audio players such as Sony’s Walkman that manage music data files with special software programs, connect to the AUDIO IN terminal of the System. (Connecting an external device)

Deactivate the security function of the USB device before connecting.

When connecting with a USB cable, use a USB 2.0 cable less than 1 m in length.

You cannot connect a computer to the USB MEMORY terminal of the System.

Do not use a USB hub.

If the USB device is divided into multiple partitions, the System recognizes only the first partition.

Power is supplied to the USB device and the device will be charged through the System when the USB device is connected to the System.

Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this System and the USB device.

We bear no responsibility for any loss of data on the USB device while using this System.

Some USB devices may not be recognized or may not operate properly.

For information on operating the USB device, see the instruction manual for the USB device.

To Top Page