Setting bass, treble and front surround

You can adjust the BASS and TREBLE levels within the range of -6 to +6 individually. In addition, setting to Front Surround enables you to enjoy music with realistic 3D surround sound.

Adjust the sound quality (TONE).

Remote control

Sound_part_150

Press repeatedly to change the setting

Select “OFF 7:15”.

LCD disp info Bass

Adjusts the bass.
LCD disp info Tre

Adjusts the treble.
LCD disp info Surr

Sets the “Front Surround”.
Select and adjust the tone to be adjusted to the desired level, or select “FRONT SURR” to set the surround.

When “BASS” or “TREBLE” is selected

Press the [ up_b ] / [ down_b ] button to adjust the level.

“TONE” blinks during the setting.

When “FRONT SURR” is selected

Press repeatedly to change the setting

Select “OFF 7:15”.

LCD disp info F Surr Off

Turns off the front surround.
LCD disp info F Surr 1

Turns on front surround 1.
LCD disp info F Surr 2

Turns on front surround 2.

Press the [ up_b ] / [ down_b ] button to select the setting.

Remote control

Select3
Arrow-Right_150
Enter Button_150

(Select)

(Enter)

Each time you press the button, the setting is changed.

NOTE

Sound adjustment (BASS/TREBLE) and front surround cannot be set at the same time.

When the front surround is enabled while the headphone is inserted, a surround effect for headphone use will be set. If the headphone is disconnected, the sound effect for speaker will be set.

If front surround has been set, deep bass (D-BASS) is disabled.

To Top Page