Reconnect

Turn on the BLUETOOTH function on the device to connect, followed by taking both headsets from the charging case. The power of the headsets turns on automatically, and they are automatically reconnected with the last connected device.

connecting_WS-A1_A1G_1

If reconnection cannot be established, operate the BLUETOOTH device to connect.

1Check that the power of the headsets is off. Powering off Using the Headset

2Turn on the BLUETOOTH function of the device to connect, followed by pressing and holding the button on the L and R headsets at the same time for about 3 seconds.

PLAY_button_LR_WS-A1_A1G

[L]

  1. The indicator on the headset lights up in white for 1 second and the power turns on.

  2. When the indicator starts to flash slowly in red, the headsets will attempt to establish connection with the last connected device.

  3. After connection is established, the L indicator continues to flash in white every 5 seconds.

    4. blue_flash_WS-A1_A1G_L

[R]

  1. The indicator on the headset lights up in white for 1 second and the power turns on.

  2. When the indicator starts to flash slowly in red, it will attempt to establish a connection with the L headset.

  3. After connection is established, the R indicator flashes twice in white and switches to flash every 5 seconds.

    4. blue_flash_WS-A1_A1G

    The headsets reconnect with the device that was last connected and can now be used for listening to music.

If reconnection cannot be established, operate the BLUETOOTH device to connect.

If the R indicator is flashing in red, this means the L and R headsets are not connected to each other. In this case, turn off the power of both the L and R headsets, followed by turning on their power again at the same time.

Pressing and holding the button of the L headset for about 5 seconds switches the L indicator light to a quick flash that alternates between red and white. If this occurs, turn off the power of the headset and repeat the steps from the beginning. Power Off

Pressing and holding the button on the L headset for about 10 seconds initializes the pairing (device registration) information. In this case, perform pairing (device registration) again.
Pressing and holding the button on the L headset for about 20 seconds initializes the pairing (device registration) information as well as the connection information of the L and R headsets. In this case, perform pairing (device registration) again after the L and R headsets are initialized. Restoring the settings to the initial state

Pressing and holding the button on the R headset for about 20 seconds initializes the settings of the headsets. In this case, perform pairing (device registration) again after the L and R headsets are initialized. Restoring the settings to the initial state