> Charging > Charging the charging case
Charging the charging case
When using a commercially available USB conversion AC adapter, make sure to choose one with an output voltage of DC 5 V and output current of 1 A and above. Otherwise, it may result in malfunction or abnormal heating.
Use only the supplied charging cable to charge the System.
Using the supplied charging cable, connect the System and a commercially available USB conversion adapter.
-
1Connect the charging cable provided to start charging.
-
Insert the USB AC adapter into the AC outlet to start charging.
5V TYPE
The indicators flash and light up in white indicating that charging has started.
The charging time for the charging case is approx. 3 hours.
Wireless Charging
The charging case can be charged using a wireless charger that supports “Qi”.
Indicators on the charging case
Indicators
During charging, the indicators light up and flash. When charging is complete, all indicators will light up.
After charging is complete, unplug the USB charging cable.
When starting to charge the charging case, the indicator may light up or flash in a different manner compared to the state before charging.
The charging case may stop charging if the temperature exceeds the charging temperature range (5 °C (41 °F) to 35 °C (95 °F)). (All the indicators on the charging case will flash.) In that case, perform charging within the charging temperature range.
When the charging case is opened or closed while it is not charged, indicators on the charging case will light up or flash for 3 seconds and display the remaining battery power.
To prevent deterioration of the battery, charge the charging case once every 6 months when it has not been used for a long period of time.
When charging the charging case that has not been used for a long period of time, it might take some time for the indicators to light up or flash. Wait for the indicators to light up or flash.