Connection & AV Setup

[Bluetooth]

Turns the Bluetooth function on or off.

[Device List]

Select the connected device to be used. Switch the connected device

[Device Name]

If you select [ON] for [Bluetooth], you can change the Bluetooth device name. See Change the device name.

[PIN Code]

If you select [ON] for [Bluetooth], you can change the PIN code.

See Change the PIN Code.

[Device address]

Display the Bluetooth device address.

[TEL SETUP]

You can make various settings for the Hands-Free function.

See Hands-Free Setup.

[Wi-Fi] ^*1

Register the Wi-Fi access point to be used for the Internet connection with SiriusXM sources. Connecting to the Internet

[360L IP Connection] ^*1

Make the settings for connecting to the Internet with SiriusXM sources. Connecting to the Internet

"ON"/"OFF" (Default)

1. When set to “ON”, Apple CarPlay, Android Auto and wireless mirroring sources cannot be used.

[Wireless Mirroring SSID]

You can change the SSID. See Change the device name or Wireless Mirroring SSID.

[Android Auto Auto Launch]

Select whether to display the Android Auto screen automatically. Default is "ON".

[Guidance/Voice Recognition Volume]

Adjust the volume of the guidance and voice recognition in Apple CarPlay or Android Auto mode. Default is "19".

[Incoming Call Volume (Ring)]

Adjust the ring tone volume in Apple CarPlay or Android Auto mode. Default is "15".

[In Call Volume (Talking)]

Adjust the dial tone volume and the volume during a call in Apple CarPlay or Android Auto mode. Default is "15".

[Speech Quality Adjust]

Adjust the speech quality.

1. [Microphone Level] : Adjust the level of microphone gain. Default is “0”.
2. [Echo Cancel Level] : Adjust the level of echo cancellation. Default is “0”.
3. [Noise Reduction Level] : Reduce the noise generated in the surrounding environment without changing the microphone volume. Use this function when the voice of caller is not clear. Default is “0”.
4. [Time Alignment] : Not used.

[iPhone Bluetooth Connection]

See Select the method of making connections for outputting sound from the iPhone source.

[Reverse with ATT]

Select whether to decrease the audio volume automatically when the gear is shifted to the reverse (R) position. Default is "ON".

[Reset Android Auto Wireless Connection]

Regenerate a Pre-shared Key (PSK) to connect wirelessly with Android Auto. A confirmation dialog will appear because the system needs to restart to regenerate a PSK.

[Built-In Amplifier]

Select whether to use the built-in power amplifier.

Turning off the built-in amplifier improves the quality of the sound from Preout.

“ON” (Default) / “OFF”