Many functions on this transceiver are selected or configured through the Menu instead of physical controls. Once you become familiar with the Menu system, you will appreciate the versatility it offers.
MENU MODE (TYPE I ONLY)
TOPMENU ACCESS
Press the key programmed as [Menu].
The category list appears. When there is only 1 category, the function list appears (proceed to step 4).
Press 
/ 
to select a category.
/ to select a category.Press 
or 
to view the function list.
or to view the function list.Press / to select a function item.
/ to select a function item.Press or to set up the selected function.
or to set up the selected function.Press 
or 
to return to the category list.
Press / to select your desired setting.
/ to select your desired setting.For settings with more than 1 level, repeat steps 5 and 6.
Press or to set the selected setting and exit Menu mode.
or to set the selected setting and exit Menu mode.Press or at any time to return to the previous display.
Press 
at any time to exit Menu mode.
MENU CONFIGURATION
Some transceiver keys may already be programmed with functions listed in the Menu. Those functions can be accessed directly by pressing the key. All other functions can still be accessed using the transceiver Menu. The following table lists the available Menu items.
|
Menu Item |
Description |
|---|---|
|
Activity Detection |
Sets the Activity Detection function as on or off. |
|
Broadcast |
Sets the call type between Broadcast Call and Conference Call. |
|
Contact List |
Displays your contact list. |
|
Display Format |
Sets the display as the zone-channel number or name. |
|
External Microphone Type |
Sets the External microphone type as Microphone 1 or Microphone 2. |
|
Fixed Volume |
Sets the Tone level of the transceiver as High, Low, or off. |
|
GPS Position Display |
Displays your location data. |
|
Home Channel Select |
Sets the current channel as the Home Channel within the current zone. |
|
LCD Brightness |
Sets the LCD brightness as High, Medium, or Low. |
|
Lone Worker |
Toggles Lone Worker mode on and off. |
|
Low Transmit Power |
Sets the output power to low when using a channel programmed with high power. |
|
Maintenance |
Enter Maintenance Display mode. |
|
Message |
Enter Message mode. |
|
Minimum Volume |
Set the smallest volume level after turning the Volume control to its minimum level. |
|
Monitor |
Sets the Monitor function as on or off. |
|
OVCM |
Sets the Open Voice Channel mode as on or off. |
|
Receive Entry |
Enter Receive Entry mode. |
|
Remote Control |
Enter Remote Control mode. |
|
RX Audio Equalizer |
Sets the receiver equalizer as flat (normal), high boost (treble boost), or low boost (bass boost). |
|
RX Auto Gain Control |
Sets the received audio volume level. |
|
Scan |
Start or stop scanning. |
|
Scan Delete/Add |
Adds or removes the selected channel to or from the scan sequence. |
|
Scrambler |
Toggles the Scrambler function on and off. |
|
Scrambler key |
Enter Scrambler key mode. |
|
Selcall |
Enter Selcall mode. |
|
Selcall + Status |
Enter Selcall mode. Press PF1 while in Selcall mode to enter Status mode. |
|
Send the GPS Data |
If programmed by your dealer, manually sends your GPS data to the base station. |
|
Squelch Level |
Enter Squelch level mode. |
|
Squelch Off |
Sets the Squelch Off function as on or off. |
|
Stack |
Places the transceiver in Stack mode. |
|
Status |
Enter Status mode. |
|
Talk Around |
Sets Talk Around as on or off. |
|
Transceiver Password |
Enter Transceiver Password mode. |
|
TX Audio Equalizer |
Sets the transmission equalizer as flat (normal), high boost (treble boost), or low boost (bass boost). |
|
TX Auto Gain Control |
Sets the Auto Gain Control function for the microphone as on or off. |
|
TX Noise Suppressor |
Sets the TX Noise Suppressor function as on or off. |
|
Zone Delete/ Add |
Toggles the Zone status between deleted and added. |
Note
The listed Menu items may change or additional items may be added.