Equalizer Control

You can adjust equalizer by selecting the optimized setting for each category.

  1. KW-Z1001W/KW-Z1000AW
    Press the button.
    KW-Z800AW
    Touch at the top of the screen.
    Touch HOME on the popup menu.
  2. HOME screen appears.
  3. Touch .
  4. Touch [Audio].
  5. Audio screen appears.
  6. Touch [EQ / SW Level].
  7. Touch the screen and set the Graphic Equalizer as desired.

Gain level (area in dotted frame)

Adjust the gain level by touching each frequency bar.

You can select a frequency bar and adjust its level by [R], [S].

[ALL SRC]

Apply the adjusted equalizer curve to all sources. Touch [ALL SRC] and then touch [OK] on the confirmation screen.

[Memory]

Saves the adjusted equalizer curve as “User1” to “User4”. Save the EQ curve

[Initialize]

Initialize (flatten) the current EQ curve.

[Preset Select]

Display the screen for selecting the preset equalizer curve. Recall the EQ curve

[Bass EXT] (Bass Extend Settings)

When turned on, the frequencies lower than 62.5 Hz is set to the same gain level (62.5 Hz).

[SW Level]

Adjust the subwoofer volume. This setting is not available when Subwoofer is set to “None”. See Speaker / X’over setup.