User Interface Setup

You can setup user interface parameters.

  1. KW-Z1001W/KW-Z1000AW
    Press the button.
    KW-Z800AW
    Touch at the top of the screen.
    Touch HOME on the popup menu.
  2. HOME screen appears.
  3. Touch .
  4. Touch [SETUP].
  5. SETUP Menu screen appears.
  6. Touch [User Interface].
  7. User Interface setting menu appears.
  8. Set each parameter as follows.

[Source Setup - Remote Control]

Select the sources to be switched with the remote controller. For how to operate the remote controller, see Remote control. Remote control (accessory) Remote control (optional)

[Beep] *1

Turn the key touch tone on or off.

Default is “ON”.

[Gesture Touch Control Effect]

Determine whether to show the trace of finger under gesture touch control. Gesture Touch Control:

“ON” (Default)/“OFF”

[MENU Button Display] (KW-Z800AW only)

This sets whether or not the button is displayed.

When this is set to OFF, operations are carried out with the included remote control.

“ON” (Default)/“OFF”

[Parking Assist Display] *2

When the iDatalink Maestro (commercially available) is connected, you can display information about obstacles around the car.

  1. [ON]: Always displays information.
  2. [Dyn.] (Default): Displays information when the sensor detects obstacles.
  3. [OFF]: Cancels this function.

[Parking Assist Position] *2

Select where to display information about obstacles on the screen (left or right).

“Left”/“Right” (Default)

[Android Auto Screen Size Switching]

Turn the Android Auto Split selection feature on or off.

“ON“/“OFF“ (Default)

[Driving Position]

Select the driving position (left or right).

“Left” (Default)/“Right”

 

  1. To use the function, it is necessary to set [Fiber Optic Output] to [OFF], and to set [X'over Network] to [2way].
  2. This can be set when the iDatalink Maestro (commercially available) is connected.