Pitch and Roll

Displays the vehicle’s angle of pitch, angle of roll, elevation, latitude and longitude, and bearing (compass).

1 Pitch display

Displays the numerical value*1 and an image of the angle of pitch.

2 Roll display

Displays the numerical value*1 and an image of the angle of roll.

3 Compass display

Displays the direction the vehicle is facing. *2

4 Elevation display

Displays the vehicle’s elevation. *2

5 Latitude display

Displays the vehicle’s latitude. *2

6 Longitude display

Displays the vehicle’s longitude. *2

7 Gear position display

Displays the current gear (P, R, N, D, 3, 2, 1) *1 *3

8 Pitch and Roll Reset button

Resets the pitch and roll angle to 0. *4

 

  1. Displays the value obtained from iDatalink Maestro (commercially available).
  2. Displays the value obtained from the GPS.
  3. This feature is only available when the iDatalink Maestro (commercially available) is connected to a vehicle with automatic transmissions.
  4. This is not displayed while Pitch/Roll data from iDatalink Maestro is being notified.

 

Switching vehicle image

You can change the image displayed for the vehicle.

Tap the image of the vehicle on the screen to change the image.