Customizing the button color

(KW-Z1001W/KW-Z1000AW only)

You can set the button illumination color.

  1. Touch [Button Illumination Color] in the Display & Button setting menu.
  2. Touch the desired color.

  4. [Variable]

    You can set the button color to continuously scan through the color spectrum.

  5. [User]

    You can set the color created with the RGB color mixer.

  6. [Car Color]

    This can be selected when the iDatalink Maestro (commercially available) is connected.

  7. Touch .

To register an original color

You can register your original color.

  1. Touch [User] on the Button Illumination Color screen.
  2. Use [-] and [+] to adjust each color value.
  4. Touch .

NOTE

  1. You can create a color based on a preset color. Touch the preset color instead of [User], and adjust the color value.