Noise canceling effect is not noticeable
The following describes possible solutions when the noise canceling effect is not noticeable. Follow the steps below to check whether the problem can be resolved.
The noise-canceling feature may not be enabled
Setting the noise canceling function
Tap the touch sensor area on the R side of the earphones quickly for 1 times
Switch to noise canceling mode
1x
Touch sensor area
Each quick tap switches on/off the noise canceling mode.
Upon switching to the noise-canceling mode, “Noise Canceling” is output from the audio guidance.
Select the state after checking
Thank you for using Troubleshooting Guide.
Adjusting the position of the earphone may improve the symptom.
Adjusting the Earphone Position
Rotate the earphones without touching the touch sensor area and adjust them to the angle that fits best.
Touch sensor area
Select the state after checking
Thank you for using Troubleshooting Guide.
Replacing the earpieces may improve the symptom.
The medium-size silicone earpieces are attached when purchased.
Choose an appropriate earpiece from the five sizes (S, MS, M, ML and L) to enhance your listening experience and for the best fit.
Using an earpiece that is not of the right size or not aligned properly can result in a lack of bass or reduction of the noise canceling effect.
Check that the earpiece is securely attached as shown in the figure.
Correct
Wrong
If the earpiece is not securely attached, it may slipped off when in use and remain in your ear. If the earpiece remains in your ear, be careful not to push it further into your ear.
Adjusting the position of the earpieces may improve the issue.
Adjusting the Earpiece Position
-
Flip the earpieces as shown in the illustration below, and align the notch on the earpieces and convex shape on the earphones.
-
Flip back the earpieces as illustrated in the diagram.
Select the state after checking
Thank you for using Troubleshooting Guide.
The effect may not be noticeable due to the surrounding environment.
The noise canceling function reduces the noise by generating sound that is exactly opposite in phase to the noise from the external environment.
Although the effect on low frequency noise such as noise from vehicles and air conditioners in a room is noticeable, it may not be as noticeable in a quiet place and with certain types of noise.
Move to another location and check the effect.