Radio in used for confirmation
3rd Party Bluetooth Accessories
Last Updated Date: Feb 28, 2022
NX-5000 Series;
| Model | Built in Bluetooth | Firmware Version | KPG-D1/ D1N (Radio Programming Software) Version | ||
|---|---|---|---|---|---|
| Version | Class | Profile/Service | |||
|
NX-5200/5300/5400 |
4.0 |
Class 2 |
Headset Profile |
2.60.00 or later |
2.60 or later |
|
NX-5700/5800/5900 |
4.0 |
Class 2 |
Headset Profile |
2.60.00 or later |
2.60 or later |
|
NX-5600H |
4.0 |
Class 2 |
Headset Profile |
3.10.00 or later |
3.10 or later |
|
NX-5700H |
4.0 |
Class 2 |
Headset Profile |
3.00.00 or later |
3.00 or later |
|
NX-5800H |
4.0 |
Class 2 |
Headset Profile |
4.23.00 or later |
4.20 or later |
|
TK-5230/5330/5430 |
4.0 |
Class 2 |
Headset Profile |
2.60.00 or later |
2.60 or later |
|
TK-5730/5830/5930 |
4.0 |
Class 2 |
Headset Profile |
2.60.00 or later |
2.60 or later |
NX-3000 Series;
| Model | Built in Bluetooth | Firmware Version | KPG-D3/ D3N (Radio Programming Software) Version | ||
|---|---|---|---|---|---|
| Version | Class | Profile/Service | |||
|
NX-3220/3320/3200/3300 (LCD Model) |
4.0 |
Class 2 |
Headset Profile |
1.40.00 or later |
1.40 or later |
|
NX-3220/3320/3200/3300 (Non-LCD Model) |
4.0 |
Class 2 |
Headset Profile |
1.40.00 or later |
1.40 or later |
|
NX-3400/3420G (LCD Model) |
4.0 |
Class 2 |
Headset Profile |
2.00.00 or later |
2.00 or later |
|
NX-3420G (Non-LCD Model) |
4.0 |
Class 2 |
Headset Profile |
2.00.00 or later |
2.00 or later |
|
NX-3720HG/3820HG |
4.0 |
Class 2 |
Headset Profile |
1.40.00 or later |
1.40 or later |
|
NX-3920G/3921G |
4.0 |
Class 2 |
Headset Profile |
2.00.00 or later |
2.00 or later |
Note:
- Headset Profile headsets and Heart Rate Service sensors available on the market can also be used. However, operation is not checked for Headset Profile headsets and Heart Rate Service sensors available on the market.
- To transmit when using a Headset Profile headset without PTT, use the PTT switch of the radio.
- Following table shows the list of tested devices and the setting information required for PTT function over Bluetooth device.
- Please note that compatibility test was held with products as of Last Updated Date. JVCKENWOOD does not take any responsibility for any changes made by listed manufactures after tested date.
- The device supporting the Heart Rate Service function or the Automatic Injury Detection Service function and the headset supporting Headset Profile cannot be connected to the transceiver together. Only the one connected to the transceiver first can be used.
- The NX-5000 Series having Version 2.5 or earlier and the NX-3000 Series having Version 1.3 or earlier support Bluetooth 3.0. Also, these support only Headset Profile and Serial Port Profile.
Compatible Bluetooth Communication Device List
| Manufacture | Product Name | Connection Type*1 | Remarks |
|---|---|---|---|
|
Voyager Legend |
Headset 1 |
PTT less model |
|
|
BT-LMIC |
Headset 2 |
|
|
|
BTH-LMIC |
Headset 1 |
|
|
|
BTH-300 |
Headset 1 |
*2, *3 |
|
|
BTH-300-NX |
Headset 1 |
|
|
|
BTH-600 |
Headset 1 |
*2 |
|
|
BTH-700/800/900 |
Headset 1 |
*2 |
|
|
Peltor WS XP (MT53H7AWS5 / MT53H7BWS5 / MT53H7P3EWS5) |
Headset 1 |
*4 |
|
|
Peltor WS ProTac XP (MT15H7AWS5/ MT15H7BWS5/ MT15H7P3EWS5) |
Headset 1 |
*4 |
|
|
Peltor WS LiteCom Pro III (MT73H7A4D10NA / MT73H7B4D10NA / MT73H7P3E4D10NA) |
Headset 1 |
*4 |
|
|
SM1P |
Headset 1 |
|
|
|
SM1P IS |
Headset 1 |
IS model |
|
|
SM1x |
Headset 1 |
|
|
|
IS-SDP |
Headset 1 |
|
|
|
smartPlug (SMPLUG03001) |
Headset 1 |
|
|
|
BTR-155 Radio (K551061) |
Headset 1 |
|
|
|
PTT Voice Responder |
Headset 1 |
|
|
|
G1 SCBA |
Headset 1 |
|
|
|
OTTO Bluetooth Revo NC2™ |
Headset 1 |
|
- *1 Bluetooth Headset Connection Type can be configured by Programming Software and/or Radio Menu
- *2 Radio's Bluetooth Device Name must be set as "RadioDongle" in order to use BTH-300 or BTH-600.
-
*3 If PTT does not work despite of the proper setting, it's might be due to the firmware of the device form PRYME.
Please call 1-714-257-0300 at PRYME who would be able to resolve that. -
*4 The product name represents the style of the headset.
A: Headset, B: Neckband, P3E: Helmet attachment
Compatible Bluetooth Heart Rate Sensor List
| Manufacture | Product Name | Remarks |
|---|---|---|
|
H10 |
|
|
|
TICKR Heart Rate Monitor |
|
- * The radio for which Bluetooth Data (KWD-5003BT/KWD-3002BT) is permitted can use Heart Rate Service.
- * If the Heart Rate Service sensor is removed from the strap, the Heart Rate Service sensor notifies a heart rate of 0 bpm to the transceiver for a few seconds. After that, the Bluetooth connection is automatically reset. To ensure that the transceiver does not automatically send the status or activate Emergency erroneously by using the Lower Threshold function upon notification of a heart rate of 0 bpm, reset the Bluetooth connection to the Heart Rate Service sensor by using Bluetooth My Devices Mode of the transceiver before removing the Heart Rate Service sensor from the strap. Or, configure Delay Time for a sufficient length of time.
Compatible Bluetooth Automatic Injury Detection Sensor List
| Manufacture | Product Name | Remarks |
|---|---|---|
|
AID Dual Mode-Radio/Cell Sensor Panel (AID 1002-2-SSS) |
|
- * The radio for which Bluetooth Data (KWD-5003BT/KWD-3002BT) is permitted can use Automatic Injury Detection Service.